当前位置: 首页 > 软件 > 正文

学习Ls-dyna必备的资料

学习Ls-dyna必备的资料

1)Ls-dyna 关键字手册,最新版本:LS-DYNA Manual R 8.0 – Vol I

2)Ls-dyna 材料模型手册,最新版本:LS-DYNA Manual R 8.0 – Vol II

3)Ls-dyna 用户手册,最新版本:LS-DYNA Manual R 8.0 – Vol III

LS-DYNA R8.0是最新版本,下面就其新功能介绍一二。
ALE
  • *BOUNDARY_ALE_MAPPING: add the following mappings:
    • 1d->2d, 2d->2d, 3d->3d.
  • *SET_POROUS_ALE:
    • new keyword to define the properties of an ALE porous mediaby an element set. The porous forces are computed by *LOAD_BODY_POROUS.
  • *ALE_FSI_SWITCH_MMG:
    • applies also now to 2D.
  • *ALE_SWITCH_MMG:
    • new keyword to switch multi-material groups based on criteria defined by the user with *DEFINE_FUNCTION.
  • *CONTROL_ALE:
    • Allow PREF (reference pressure) to be defined by materials. Implement *ALE_COUPLING_NODAL_DRAG to model the drag force coupling between discrete element spheres or SPH particles and ALE fluids. This command includes an option to calculate the drag coefficient using *DEFINE_FUNCTION.
  • Implement *ALE_COUPLING_RIGID_BODY as an efficient alternative for constraint type coupling between ALE fluids and a Lagrangian rigid body.
Boundary
  • Fix input rounding error when reading the 5th load curve of *BOUNDARY_PRESCRIBED_ORIENTATION_RIGID_DIRCOS, which was read and stored as real, causing errors in single precision for load curves with more than 7 digits.
  • *BOUNDARY_PAP could calculate incorrect pressure in MPP when CVMASS>0; now fixed.
  • Fix incorrect external work when using *BOUNDARY_PRESCRIBED_MOTION with or without _RIGID option. The DOF specified was not considered when computing the external work.
  • Fix incorrect velocities when using *BOUNDARY_PRESCRIBED_MOTION_RIGID_LOCAL and *INITIAL_VELOCITY_RIGID_BODY for rigid bodies.
  • Error terminate if *BOUNDARY_SPC_NODE_BIRTH_DEATH is applied to a node that belongs to a rigid body.
  • Fix *BOUNDARY_SPC_SET_BIRTH_DEATH which was not working for MPP when the birth and death time were set to non-zero.
  • Fix incorrect ID number in d3hsp for *BOUNDARY_CYCLIC.
  • Fix output to bndout (*DATABASE_BNDOUT) for *BOUNDARY_PRESCRIBED_ORIENTATION_RIGID.
  • Modify *BOUNDARY_PRESCRIBED_ORIENTATION_VECTOR to accommodate bodies which undergo no changes in orientation.
  • Fix bug in which typeID in *BOUNDARY_PRESCRIBED_MOTION could not be input as an alphanumeric label.
  • Add a new keyword *BOUNDARY_SPC_SYMMETRY_PLANE:
    • Purpose: Define constraints to enforce planar symmetry for nodes on or near a specified plane. These constraints will be enforced even during adaptivity. This command is similar to *CONSTRAINED_LOCAL but allows selectivity via a part ID.

 

 

本文固定链接: http://www.simtape.com/?p=439 | 指南针部落

该日志由 david 于2016年06月11日发表在 软件 分类下, 你可以发表评论,并在保留原文地址及作者的情况下引用到你的网站或博客。
原创文章转载请注明: 学习Ls-dyna必备的资料 | 指南针部落
关键字:

学习Ls-dyna必备的资料:等您坐沙发呢!

发表评论


快捷键:Ctrl+Enter